Radiosonde:
In the past few years many countries has rapidly developed and adopted Upper-air operational system, GPS sounding systems. We S S Micro Electronics Technology (P) Ltd. has also developed Indigenous Upper-air operational system, GPS sounding systems. This system is used to measure the meteorological elements as temperature, air pressure, humidity, wind direction, wind speed and altitude etc. from ground to around 40 Km in the aerological atmosphere directly and accurately. Radar tracking on ground is not used in this system, but it employs a high precision GPS to automatically track the sounding of the balloon. As a result of this automaticity the accuracy of the system improves significantly.
We have participated in the inter-comparison for GPS Radiosonde manufactured by Indian Manufacturers conducted by India Meteorological Department at New Delhi and we are proud to announce that our GPS Radiosonde secured the maximum marks in technical parameters.
SS SONDE 01 Radisonde (GPS Aerological Meteorological Sounding System) can accomplish the measurement of the five meteorological elements viz. temperature, air pressure, humidity, wind direction and wind speed with accuracy comparable with the best in the industry. High speed data processing terminal automatically records and process the meteorological data and print reports needed to predict the weather accurately for research of boundary layer and weather prediction.
The Ground Receiving System ( SS SONDE GRS 01) developed by S S Micro Electronics Technology (P) Ltd. mainly consists of directional UHF antenna (hereinafter referred to as antenna), ground receiver, ground check box, sounding software and terminal computer or tough book as per user requirements. In control of the terminal computer the antenna automatically tracks the flying radiosonde. The receiving module of the ground receiver receives the signals from antenna and demodulates the received signals into temperature data, humidity data, pressure data, longitude, latitude and height as well as other signals and sends them to the terminal computer through serial port time per second. The sounding software completes the editing of the original data detected and makes all the reports as per the user requirement. Terminal computer is used for data collection, data processing, data verification, system fault monitoring, alarming and so on. The ground test box is used to check whether the checked radiosonde works well or not.
The Ground Receiving System ( SS SONDE GRS 01) developed by S S Micro Electronics Technology (P) Ltd. mainly consists of directional UHF antenna (hereinafter referred to as antenna), ground receiver, ground check box, sounding software and terminal computer or tough book as per user requirements. In control of the terminal computer the antenna automatically tracks the flying radiosonde. The receiving module of the ground receiver receives the signals from antenna and demodulates the received signals into temperature data, humidity data, pressure data, longitude, latitude and height as well as other signals and sends them to the terminal computer through serial port time per second. The sounding software completes the editing of the original data detected and makes all the reports as per the user requirement. Terminal computer is used for data collection, data processing, data verification, system fault monitoring, alarming and so on. The ground test box is used to check whether the checked radiosonde works well or not.
